 |
| Quantity: | |
|---|---|
1.Operation: Dispensing silicone is a production of silicone products processing technology, silicone raw materials in liquid form, raw materials in the syringe inside the pneumatic and manual operation of the raw material drops to the mold, heating and vulcanization molding. This process belongs to the manualized process, which requires a lot of labor, so the capacity is not high. It has a feature that a product can be dripped on a variety of colors according to the requirements, so this process is mostly for the production of high-end silicone products.
2.The characteristics of product features: Drip feel very good, the service life is also very long. Drip silicone products are waterproof, corrosion resistance, wear resistance, decorative features. Decorative mainly embodied in the drip glue has a crystal clear effect, but also can increase the gloss of silicone products products. The drip process not only makes silicone products products beautiful, but also protects the surface of silicone products from damage.
3.Attention:
A.Ensure that all appliances are clean during the glue dripping process, so as not to affect the glue curing surface impurities, ripples, pockmarks and other bad.
B.The proportion of glue must be weighed accurately, the glue must be stirred evenly, otherwise it will lead to incomplete curing of the glue drop, super long time curing.
C.The humidity of the working environment of the dispensing silicone is controlled within 68%, it is not recommended to carry out the glue drop work on rainy days, because when the air humidity is too high, the mist in the air will directly lead to the oxidation of the surface of the glue, and it is recommended to use the air dehumidifier in the case of tight production tasks.
D.For silicone products with strict effect of dispensing silicone, they should be placed in the drying area centrally, and the temperature should be controlled between 28°- 40°.
