 |
| Quantity: | |
|---|---|
1.Silicone crossing linker characteristics: excellent high temperature resistance, strong adhesion, very strong, stable and durable printing. At the same time can also resist the corrosion of some chemical substances to reduce the likelihood of product failure, not only in the fabric above, but also can be widely used in plastics and other products, in the silkscreen silicone production process can be quickly and stably complete the printing, improve production efficiency!
2.It is the bridge between silicone and hot melt adhesive, so that the silicone and hot melt adhesive between the non-peeling, non-delamination. The company's middle layer of adhesive products 360Z-1 according to the ratio of 10:1 add curing agent 360ZB, printed twice in the silicone layer, to be dry and then print the hot melt adhesive.
3. Operation steps:
3.1：A.Silicone according to 100:2 deployment, according to 8-10% add color paste, mix well, printed on the transfer film, silkscreen once, baked to the surface dry until the desired effect and thickness, color, etc., and finally bake the surface dry.
B.Silicone crossing linker 10:1 blend evenly, printed on the surface of the silicone, once two cuts, baked table dry. Print again two cuts, bake to dry, and then print the hot melt adhesive can be (hot melt adhesive to use 360R-3).
C.Remove the film, put it into the oven, bake at 100 degrees for 40 minutes, take it out and cool it down, then you can transfer the print. 150 degrees hot stamping for 6-8 seconds.
3.2：A. XG-360R-2 hot melt adhesive is widely used in silicone transfer, good wash fastness, suitable for a variety of fabrics to do the transfer effect.
B.Use silicone priming (specific thickness according to customer sample thickness printing)
C.Silicone priming is completed using XG-360Z middle layer of glue, for nylon waterproof fabric priming and glue transfer program effect, the middle layer of additives 10%.
D.Silicone crossing linker baked to the surface dry, using hot melt adhesive printing 4 times, dry with the oven baking surface, the finished product will be printed in the oven for 40 minutes to bake!
