 |
| Quantity: | |
|---|---|
1. PU Leather Paste uses water-based dispersion to replace the traditional solvent-based resin, greatly reducing the environmental pollution in the production process.
2.Characteristics:
A.Does not contain toxic and harmful substances, such as heavy metals and harmful solvents, fully in line with environmental requirements.
B.The paste is easily soluble in water, easy to operate, without special equipment, can realize uniform coating.
C.It can form a layer of uniform, smooth and elastic film on the surface of leather, and significantly improve the texture and feel of leather.
D.Has excellent water resistance, weather resistance, wrinkle resistance and other properties, greatly extending the service life of the leather.
3.Use method:
A.Clean and pre-treat the leather surface to ensure that there is no oil, dust and other impurities.
B.According to the manufacturer's recommended ratio, water-based leather pulp into the appropriate amount of water to dilute, and mix well with a mixer.
C.Use tools such as scraper, roller or spray gun to evenly spread the diluted water-based leather paste on the leather surface.
D.Will be coated leather placed in a ventilated dry place, natural drying or low temperature drying, so that the water-based leather pulp completely cured.
4. Has the following obvious advantages:
A.Water-based leather pulp is non-toxic and harmless to the environment and operator health.
B.Due to the use of water-based dispersion, the production cost is lower than solvent-based resin, saving costs for enterprises.
C.It has good film-forming, weathering and crease resistance, which improves the overall quality of leather.
D.Simple operation, no need for special equipment, easy to promote the use in the existing production line.
5.FAQ
Q1、How is the film-forming property of PU Leather Paste?
A: It has good film-forming property. After coating on the surface of leather, it can form a layer of uniform, smooth, elastic film, which significantly improves the texture and feel of leather.
Q2、Use PU Leather Paste need to pay attention to what problems?
A: First of all, ensure that the leather surface is clean and free of impurities; Secondly, according to the manufacturer's recommended ratio of dilution and mixing; Finally, pay attention to control the thickness of coating and drying temperature, to ensure that the water-based leather slurry completely cured.
