Views: 4 Author: Site Editor Publish Time: 2023-09-22 Origin: Site
1、Materials Needed:
XG-20S-1 (silicone ink)
Catalyst KB-1
Thinner XG 128AH
Pigments for color
Scissors
Dipping rope
Blade
Oven for baking (60-80℃)
2、Instructions:
1. Preparation:
Before dipping, make sure you have all the necessary materials ready, including XG-20S-1, catalyst KB-1, thinner XG 128AH, and the pigments you intend to use.
Note that mixing pigments can create special effects, so prepare your desired pigment colors in advance.
2. Mixing Clear Silicone Ink:
Mix 100g of XG-20S-1 with 100g of XG-128AH thoroughly.
Add 10g of catalyst XG-KB-1 to the mixture.
This mixture will be used for the clear silicone ink layer.
3. Applying Clear Silicone Ink:
Dip the clear silicone ink for one layer using a dipping rope.
Level the dipped rope with a blade.
After one hour, cut off any excess dipped rope with scissors.
4. Mixing Colored Silicone Ink:
Mix 100g of XG-20S-1 with 100g of XG-128AH thoroughly.
Add 10g of the desired pigment to the mixture and mix thoroughly.
Finally, add 10g of catalyst XG-KB-1 to the colored silicone ink mixture.
5. Applying Colored Silicone Ink:
Dip 3-4 layers of colored silicone ink.
Start dipping before the surface is completely dry, which usually takes about 1 hour.
Level the dipped rope with a blade each time you apply a layer.
6. Applying Matte Silicone Ink:
Mix 200g of XG-128AH with 100g of XG-136M thoroughly.
Add 10g of catalyst XG-136M to the mixture.
This mixture will be used for the matte silicone ink layer.
7. Applying Matte Silicone Ink:
Dip the matte silicone ink for one layer using a dipping rope.
8. Baking:
Finally, bake the dipped rope at a temperature of 60-80℃ for about 1 hour.
These instructions outline the process of using silicone inks for screen printing, including clear, colored, and matte silicone inks, along with the necessary catalysts and thinners. Be sure to follow these steps carefully to achieve the desired results in your screen printing project.
